Common Electrical Projects and Their Costs, electrical repair costs.#Electrical #repair #costs


Posted On Oct 13 2017 by

#

Electrical Project Costs

Electrical improvements will put a bite in your wallet, especially with the high cost of copper these days. This is a look at what the average cost is for common electrical projects.

Electrical Service

Electrical repair costs

If you’re like a lot of people in an older home, the service is probably 60 amps and underrated. With the large demand for power in today’s home, a minimum of 100 amps is required. Larger homes will require 200 amps or more. Just as a guideline, a 100-amp service will likely run you around $1000. The 200-amp service will run you another $500, depending on the cost of wire and the area that you live. This will include a new meter, disconnect, wire, piping, panel, and a weather head.

Ground Fault Circuit Interrupter (GFCI)

Electrical repair costs

A skilled electrician can install this outlet in about 15 – 30 minutes. That combined with the price of the wire, outlet, box and miscellaneous parts will run you approximately $100.00 – $200.00 to complete.

Three-Way Switches

Electrical repair costs

A skilled electrician can install a set of three-way switches in under an hour. This includes a piece of 12-2 wire with a ground and a piece of 12-3 wire with a ground. Two switches are needed and any boxes that might need to be changed. This will run $100.00 – $225.00 for a complete installation.

Outlet

Electrical repair costs

A standard outlet can be installed in 15 – 30 minutes. An outlet, box, wire, ​and labor should run you $100.00 – $150.00 for the installation.

Spruce Up Your Inbox!

Get daily tips and tricks for making your best home.

220-Volt Outlet

Electrical repair costs

An outlet to run a larger 220-volt outlet requires larger wire. That means the cost of this operation is a little higher. The combination of the outlet, wiring, box and labor would be around $100.00 – $150.00. The installation should take less than 30 minutes.

Single-Pole Switch

Electrical repair costs

A skilled electrician can install a single-pole switch in less than 30 minutes. Wire, a switch, a cover plate a box is needed for this installation. To simply change the switch out, we d treat this like a service call costing $100 – $125. However, if this is a new installation, you be needing a box, wire, switch and a cover, it s likely an $150 – $200 fee.

Entire House Wiring

Electrical repair costs

Prices for wiring a house will vary from contractor to contractor. There are many variables involved, so this is a general price quote. On average, you have to figure $50 – 75 an opening. That means every switch, outlet, light, etc. times that rate. An average two to three bedroom home of 1,600 square feet would run you roughly $2,500.00 – $5,000.00 for a complete installation. Keep in mind everything depends on the number of switches, outlets, wire, circuits, wire cost, etc. For a simple . MORE ranch home, this should give you a good idea of the cost associated with electrical installation costs.

Garage Wiring Updates

Electrical repair costs

In order to get your home s electrical updated, don t forget to update the garage wiring and devices. Due to recent updates in the National Electrical Code, garages now have to have GFCI outlets. This would cover interior and exterior outlets, not to mention out buildings.

With the addition of GFCI outlets in place of regular outlets, the cost of changing everything out can be costly, depending on the number of outlets your garage has. Be sure to calculate the cost of the GFCI s, the . MORE possibility of having to change outlet boxes, and installation costs, you should figure somewhere in the neighborhood of $75 – 125 per opening.





Last Updated on: October 13th, 2017 at 10:08 am, by


Written by admin


Leave a Reply

Your email address will not be published. Required fields are marked *